Easy tek 6 Mod

Creditd to NM&R for pic.

Today I will be showing you an easy mod for your Tek 6.
Step 1: Unscrew your Tek 6. This shouldn't be too hard. Only about 6 screws. You will need a philips head screwdriver.
Step 2: Take out the barrel assembly. It is connected to that rod so don't try to break it.
Step 3: Get a somewhat small screwdriver and a hammer or something.
Step 4: Hammer the small screwdriver in those holes. You'll hit the pegs and knock them out.
Step 5: Put your blaster back together. Remember that spring on the rod goes BEHIND the trigger.
Your done!!