Jolt mod

I finished my Jolt mods. I'll get proper ranges later but for now here's a guide.

Step 1: Well duh! Get a Jolt!
Step 2: Get out the internals assembly. The blaster doesn't come apart. The internals are in the handle. Unscrew that.
Step 3: Now concentrate on the barrel. I drilled it clear. Nothing in there now. I can shove a streamline in there.
Step 4: Get out the air restrictor. Just drill it out or something.
Step 5: Get a tek 6 spring. In the guide I used the person said reads 12,rogue,etc.
Step 6: Unscrew the internals cap. Get out the stock spring and put in the tek 6 spring.
Step 7: Screw the cap back on. Might be a decent challenge.
Step 8: Put back in the internals. With the tek 6 spring in it is a challenge.

Your done!!!!!!
Ranges:
Modded
Flat-35 feet
Angle-40 feet
Large Angle-45 feet
Stock
Flat-20 feet
Angled-30 feet